Bed Bug Treatment in Melbourne starts with a full inspection of your mattress seams, bed frame, skirting boards and power points, because that is where the bugs hide. We treat the whole room, not just the bed, using heat and residual products that kill eggs, nymphs and adults. If you have been bitten for weeks and cannot sleep, contact us today.
Bed Bug Treatment in Melbourne is a two-part process: a detailed inspection to confirm the infestation and map every harbourage, then a targeted application of heat, insecticide or dust formulations to the mattress, bed frame, skirting, carpet edges and power points.
Bed bugs hide in seams, screw holes and wall cavities, so we treat the room as a system rather than spraying the mattress and hoping. Every job finishes with a follow-up check 10 to 14 days later, because eggs hatch on their own schedule.
Melbourne's inner-city apartment stock gives bed bugs an easy run. Shared walls, ducted heating, high-turnover rentals and second-hand furniture all move them between units in Toorak, South Yarra, Cremorne and the CBD fringe.
If you are searching for how to get rid of bed bugs in Melbourne, the answer is almost never a supermarket spray. We use professional bed bug treatment Melbourne products that carry residual action, plus thermal imaging cameras to confirm hotspots before we treat.
Every bed bug job includes the inspection, the treatment itself, and one follow-up visit. The inclusions below are standard on all bookings. If your situation needs something extra, like a full building sweep or mattress encasements, we will quote it upfront so there are no surprises on the invoice.
We inspect mattress seams, bed frames, headboards, skirting boards, power points, picture frames and bedside furniture. Thermal imaging cameras and moisture meters confirm harbourages that are not visible to the eye. This takes 30 to 45 minutes and determines which treatment method we use.
Depending on the infestation, we run a heat cycle at 50 to 60 degrees Celsius or apply residual insecticide to cracks and crevices. Beds are treated on all sides, including the underside of the base. Wall cavities and power points get a dust formulation applied with a dust applicator.
Both sides of the mattress and the full bed base are treated, including the seams, piping and any tears in the fabric. We do not remove the mattress from the room, which avoids spreading bugs into other areas of the home. Encasements are available as an optional extra.
We return 10 to 14 days after treatment to check monitors and re-inspect the same harbourages. If live activity is present, we re-treat at no charge. This visit is included in the quoted price and is the reason our warranty holds up.
You receive a written warranty covering the treated rooms, plus an aftercare sheet explaining what to wash, what to vacuum and when to expect the last of the activity. Renters and landlords also get a report suitable for bond claims and insurance.
You describe what you are seeing: bites, blood spots, shed skins or live bugs. We ask about the building type, how many rooms, and whether anyone in the house has asthma or chemical sensitivity. This takes five to ten minutes and lets us book the right treatment and the right amount of time.
A licensed pest controller inspects the mattress seams, bed frame, headboard, skirting boards, power points, picture frames and bedside drawers. We use thermal imaging cameras and moisture meters to find harbourages you cannot see, and we confirm the species before quoting. Inspection takes 30 to 45 minutes.
We give you a one-page prep sheet: wash and bag bedding at 60 degrees, clear floor clutter, and vacate the room for four to six hours after treatment. We handle the heavy lifting on furniture. Pets go outside or to another room during the treatment window, and fish tanks get covered and aerated.
Depending on the infestation, we run a heat cycle, apply residual insecticide to cracks and crevices, and dust wall cavities and power points with a dust applicator. Beds are treated on all sides, including the underside of the base. The full application takes two to four hours for a standard bedroom.
We return 10 to 14 days later to check monitors and inspect the same harbourages. If activity has stopped, we issue your warranty paperwork and aftercare sheet. If not, we re-treat the room at no charge. This second visit is what separates a proper job from a one-off spray.
You describe what you are seeing: bites, blood spots, shed skins or live bugs. We ask about the building type, how many rooms, and whether anyone in the house has asthma or chemical sensitivity. This takes five to ten minutes and lets us book the right treatment and the right amount of time.
Used during inspection to find heat signatures from bed bug clusters inside wall cavities, bed frames and furniture joints. They let us confirm harbourages before we treat, rather than spraying the whole room blindly.
Professional pump and low-pressure sprayers apply residual insecticide to skirting boards, carpet edges, bed frames and cracks. Low pressure keeps product where it belongs and avoids overspray onto surfaces you touch.
Handheld dusters apply fine dust formulations into wall cavities, power points and behind skirting boards. Bed bugs shelter in these voids, and dust reaches places liquid sprays cannot.
Used to check for damp patches in walls and floors, which attract bed bugs and other pests. Damp areas also affect how long residual products stay effective, so we adjust the treatment plan accordingly.
Placed under bed legs and along skirting during the follow-up period. They confirm whether activity has stopped and give us a clear answer before we sign off on the warranty.
Electric heaters and fans raise the room to 50 to 60 degrees Celsius and hold it there for several hours. This kills eggs, nymphs and adults in one cycle, including bugs hidden deep in furniture and wall voids.
A couple had been bitten for five weeks and had used two supermarket sprays. Live bed bugs were found in the main bed base, along the skirting in both bedrooms and inside two power points. The second bedroom had not been slept in for a month but carried the heavier infestation.
After: We ran a heat cycle in both bedrooms and applied dust to the wall voids and power points. The follow-up at day 12 showed zero activity on the monitors. No bites reported after the second night, and the warranty was issued on both rooms.
Book this service →
A family of four had bed bugs in two bedrooms and the living room sofa. The timber floors and deep skirting boards gave the bugs plenty of harbourages, and the sofa had been treated once before with no follow-up. Activity was confirmed in three separate areas.
After: We treated all three rooms with residual insecticide and dust, and ran a heat cycle on the sofa. The day 14 follow-up showed no live activity. The family stopped being bitten within 48 hours of the first treatment and slept normally from the third night.
Book this service →
A property manager needed a bed bug clearance before a new lease started in nine days. The previous tenant had reported bites for a month. Inspection found bed bugs in the main bedroom frame, along skirting and in one wardrobe.
After: We treated the bedroom and wardrobe, applied dust to the skirting voids, and returned on day 10 for the clearance check. The report was issued the same day, and the new tenants moved in on schedule with no complaints in the following six months.
Book this service →Bed bugs are not caused by poor cleaning, and they are not something you can starve out by sleeping elsewhere. These are the problems we see most often and how we solve them.
Ask a pro →We inspect the bed and surrounding furniture to confirm bed bugs rather than fleas or mosquitoes, then treat the room with residual insecticide and dust. Most customers stop being bitten within two nights of treatment, and the follow-up visit confirms the cycle has broken.
We use professional-grade products from Bayer, BASF and Syngenta, applied to the harbourages rather than the visible surface. Heat treatment is available where sprays have already failed, and it kills eggs that chemicals cannot reach.
We treat your unit thoroughly and, where the building manager agrees, coordinate treatment of adjoining units and common hallways. We also provide documentation so the owners corporation can act on the whole floor rather than one door at a time.
We run end of lease bed bug treatments with a written report for the agent, covering inspection findings, products used and warranty terms. Most jobs are completed within 24 hours of booking so the property can be re-let on schedule.
Heat treatment is the most reliable single method because it kills eggs, nymphs and adults in one cycle, and it reaches inside wall cavities and furniture joints that sprays miss. For lighter infestations, a residual chemical application with dust in the wall voids works well and costs less. We recommend the method after inspecting, not before.
A standard bedroom takes two to four hours to treat, and a two-bedroom apartment takes four to six hours. Heat cycles run longer, usually five to seven hours including setup and cooldown. You can re-enter the treated rooms after four to six hours of ventilation, and sleep in them the same night.
Yes, once the treated area is dry and ventilated, usually four to six hours after application. We ask you to keep dogs, cats and birds out of the room during treatment and until surfaces are dry, and we cover fish tanks and turn off their aerators. Tell us about any pets when you book so we can select the right products.
Every job is handled by a licensed pest controller and backed by a written warranty with a free follow-up inspection. Get a quote and we will book the earliest available slot, often the same day.
Schedule service →Send us the form with your suburb and what you have seen, and we will come back with a time window and a price range. Servicing Melbourne and the surrounding suburbs.